Operation specification for precision hardware processing
Date of release:2020-12-08 00:00:00 Author: Click:
1 in the precision hardware process of product processing. Operators should maintain correct posture and enough spirit to cope with the work. If you feel unwell, you must leave the post immediately to ensure personal safety, and report to the workshop supervisor or superior leader. It is strictly forbidden to cooperate with each other during the operation. Operators shall not operate in the state of irritability and fatigue, so as to avoid accidents and ensure the safety of operation. All employees should check whether their clothes meet the work requirements before entering the work. Do not wear slippers, high-heeled shoes and clothes that affect safety. People with long hair should wear safety helmet.
2. Before the machine works, first check whether the moving parts are filled with lubricating oil, then start and check whether the clutch and brake are normal, and make the machine idle for 1-3 minutes. It is forbidden to operate in case of mechanical failure.
3. When replacing the mold, the power should be turned off first. After the mold installation and debugging is completed, the punch moving part stops running. After installation and adjustment, move the flywheel twice by hand. In order to avoid unnecessary collision between the machine and the products to be processed, it is necessary to check whether the upper and lower dies are symmetrical and reasonable, whether the screws are firm, and whether the blank holder ring is in a reasonable position.
4. All personnel shall leave the mechanical working area and clear the sundries on the working table before starting the machine.
5. When the machine is working, it is strictly forbidden to enter the sliding block working area and take and place the workpiece by hand. Standard tools must be used when taking out and placing the workpiece in the mold. In case of abnormal sound or machine failure, the power switch should be turned off immediately for inspection. After the machine is started, a person is responsible for handling materials and operating the machine. No one else should step on the electrical building or pedal switch. For the safety of others, it is not allowed to reach into the mechanical working area or touch the moving parts of the machine with hands.
The precision hardware above is a detailed introduction of precision hardware processing technology and operation specifications. Hardware products of precision hardware manufacturing are not final consumer goods, but as supporting products of industrial manufacturing industry, there are also some semi-finished products. Only a small part of precision hardware products are tool consumer goods. For example: screw driver, screw driver, wrench, fishing gear, etc. Precision hardware accessories are machine parts or components made of precision hardware or some small hardware products. They can be used alone or as AIDS.
The address of this article:http://en.afthcn.com/news/739.html
The next one:How to better choose the cleaning agent for precision hardware
- What are the materials of common stretch spring manufacturers?
- What is a stretch spring?
- What should I pay attention to when choosing a torsion spring?
- Precision hardware can be cut according to production needs, and then some small accessories can be processed by Gong cutting or numerical control processing. Precision hardware containers must be processed with blanking punch, then welded, polished, spra
- Heterosexual spring manufacturer: What are the functions of springs?
- Selection of the category of tension spring
- How to better choose the cleaning agent for precision hardware
- Working principle of torsion spring
- What are some common tensile spring materials?
- You probably dont know how to clean precision hardware