Hello! Welcome to Foshan Shunde Aofeng spring Co., Ltd!

CHINA | ENGLISH | Email | Sitemap |
异形弹簧
Your current location: Home >> News >> News

Type of shaped spring manufacturers

Date of release:2020-09-26 00:00:00 Author: Click:

The difference between a profile-shaped spring and a conventional spring is that the spring itself is irregular, with twists and many complicated Angle design. It is suitable for some special occasions.

There are many varieties of special-shaped springs, which are respectively introduced as follows:

(1) Variable diameter coil spring: it is used for some special occasions, the information of variable diameter spring is generally circular section information, and most accept the tightening load.

(2) The torsion bar spring is actually a straight rod made of elastic data under the action of torque. It has large deformation energy per unit volume and is mainly used for suspension devices of various vehicles.

(3) Snake-shaped spring is named for its zigzag shape such as snake, according to its shape, also known as "Z" shape and "S" shape spring. It is widely used in car seat cushion, so it is also called seat spring.

(4) The dish spring size is small, light weight, widely used in cushioning, shock absorbers and other occasions, and in stamping die, valve clutch fasteners and petroleum and geological engineering machinery has been widely used.

(5) The plate spring can be a single sheet of spring plate or multiple sheets superimposed, and its buffering and damping function is good, especially the vibration damping function of the multi-plate spring is strong, mainly used for the suspension of cars, tractors and railway vehicles.

(6) There are two types of spring clips: circular section data and rectangular section data. Sometimes, for ease of installation, there are also those that make the spring clips into an end and then a winding section. In the manufacture of the clamping coil, the close-wound spring coil can be self-flat after being cut off, and it is necessary to have a large initial stress when winding.

(7) The annular spring is formed by the cooperation between the outer ring with an inner cone and the inner ring with an outer cone, and the logarithm of the inner ring is determined according to the size of the accepted load and the requirements of deformation. Ring springs have high damping capacity and are primarily used in heavy equipment and buffering devices.

shaped spring manufacturer

(8) Multi-strand coil spring is generally the first 0.5mm~3mm steel wire twisted into a cable, and then rolled into a spring, the most commonly used is not with the center of the 3 ~4 strands of cable. When the cable more than 4, there should be a center of the cable, in order to make the cable force is not loose, the cable should be opposite to the rotation of the spring.

(9) Unequal pitch coil springs are mainly used for suspension springs of motorcycles and small passenger cars and valve springs of high-speed engines. On the same spring, it can satisfy the requirement of small stiffness with small deformation and large stiffness with large deformation. Unequal pitch springs just satisfy these special requirements.

(10) A cochlea coil spring ACTS like a conical coil spring in that it receives a large amount of energy under pressure and, because of its manufacturing difficulties, is used only in special cases subject to space constraints. The planar spiral spring has many coils, large deformation, and can store large energy. It is mainly used to compress the spring and the energy storage element in the instrument and meter.

(11) Wire spring is a variety of wire spring made of spring wire, generally made of cold-drawn spring wire. Line spring is mostly used in situations where the load is small and there is no strict requirement on the load characteristics. The section of line spring is usually round, so the load has no direction limit and has the same bending stiffness in all directions.

(12) Sheet spring: the information of this spring is spring strip (or plate), in special equipment or general pressure machining machine, after the corresponding mold processing. Sheet spring, waveform spring, light spring data thickness is thinner, and medium or large disk spring data thickness is often thicker, the use of this type of spring is also very wide.

(13) When the installation space is limited, the spring with rectangular section data is often used, because the spring made with rectangular section data can obtain a large load under the same space and the same deformation. This type of spring has a larger cross-sectional area in the same space than a spring with circular cross section data, and therefore it absorbs more energy. It can be used in heavy machinery, stamping dies or springs with particularly high stiffness.

Because the smaller spring rings at both ends can be embedded into the central ring, a larger amount of deformation can be obtained. For example, some medium - convex car brake springs, usually in a tight condition, open the car valve, spring recovery deformation, drive the brake on the car brake. Hair clippers are also used in the convex spiral spring this feature, in the effective space to obtain greater deformation and stress.

(14) Clamp spring is usually used for fastening liquid storage tank of car, belonging to the category of double torsion spring. This kind of spring can be rolled with CNC spring machine in qualified enterprises, the general enterprise is with the craft of rolling, rolling can make some special auxiliary. Plate material block, the straightening first, and then made into "U" type, and rolling bent on special auxiliary equipment and auxiliary equipment can be cooperative sector gear feeding spring coiling machine utilization, using spring coiling machine feed back and forth organization will also "b" is placed in the position of the feed roller, can complete the clamp spring curved half automation production, about 10 times than its produce craft operation progress.


The address of this article:http://en.afthcn.com/news/692.html

Key word:tensilespringmanufacturer,torsionspringmanufacturer,shapedspringmanufacturer

Recently browse:

Foshan Shunde Aofeng Spring Co., Ltd

China's Company Address:

No.4, Chengye Road, Xiashi Industrial Zone, Shunde District, Foshan City, Guangdong Province,China

Tel: 86-757-27333229

Fax: 0757-22389509

E-mail:sale2@afthcn.com


Aofeng Spring (Thailand) Co.,Ltd

Thailand Company Address: No.7/432 Moo6, Mabyangporn, Pluakdaeng, Rayong,21140,Thailand

Fax: + 66 (0) 038015664

E-mail:sale2@afthcn.com

website: en.afthcn.com


dibulogo.png

ewm.png

Mobile website

  • email
  • number
    86-757-27333229
  • Message
  • Online Service