Design and production of tension spring
Date of release:2019-04-18 00:00:00 Author: Click:
Tension spring, suitable for high and low temperature, corrosion resistance and other working environment, the material mainly includes stainless steel spring line, carbon steel wire, oil quenching and tempering alloy spring line, high and low temperature alloy spring line.
The rings are tightly wound so that they can be stretched by [1] force. Each end is wound by a Loop. The following is the necessary information for a stretching spring:
(1) free length :(a) total length, (b) total ring length, and (c) length inside the self-hook ring.
(2) control diameter :(a) outside diameter, (b) inside diameter, and (c) inside diameter of the casing.
(3) steel wire size "wire diameter".
(4) material (type, grade).
(5) winding number :(a) total winding number and (b) right-handed or left-handed.
(6) the form of the end.
(7) load inside the hook.
(8) load rate, flexure and pounds per inch.
(9) maximum stretching length.
The Extension Spring is a typical Spring, that is, the representative of the Spring. The Extension Spring can be shaped according to the design from the straight cylinder to the various variants and even the various shapes of the hook.
The Extension Spring is the reverse application of the compression Spring. The application range is generally less than the specific product category, but the operation control is higher than the compression Spring.
Compression Spring
Is the circle is divided, because can bear the pressure, both ends can be open or closed or wound flat or worn flat. The following are the necessary information of a compression spring:
Control diameter (a), (b), (c) the diameter of the casing and (d) the diameter of the rod.
(2) Wire or bar size.
(3) material (type and grade).
(4) winding number :(a) total winding number and (b) right-handed or left-handed.
(5) Style of ends.
(6) the load under a certain torsion length.
(7) the load ratio within the range of one inch to several inches.
(8) Maximum solid height.
(9) minimum compression height in operation.
The address of this article:http://en.afthcn.com/news/420.html
Key word:拉伸弹簧厂家
The next one:How do you choose the right paint for a car spring
Recently browse:
Related products:
Related news:
- The safety of torsional spring manufacturers is the most important
- Stress test method for special-shaped spring manufacturers
- Heterosexual spring manufacturer: What are the functions of springs?
- Shaped spring manufacturers in the production of defects will appear
- Why does the stretch spring manufacturer test it?
- How to let stretch spring manufacturers get rid of cracks
- Processing characteristics of spring zinc plating
- What are the factors that affect the selection of spring material?
- Torsional spring manufacturers working principle
- The role of hot coil spring is not to be underestimated